Tomb Raider’s St Francis’ Folly & Intention In Level Design

Level design is one of the fundamental building blocks of creating a game; it is the world that we inhabit. We can all think of great games with some excellent level design and all in different ways.

Some games use their design to aid you with traversal through a single path; Faith’s “Runner’s Vision” in Mirror’s Edge guiding the way through colour, or scratched/worn down walls in Prince Of Persia showing you can wall run are two that come to mind.

In a similar vein, other games allow a wide range of possibilities from a single starting point. Metroid and Castlevania have an almost exclusive hold over this type of design (so much that “Metroidvania” is a portmanteau in gaming culture). Newer titles such as Hitman and Ratchet And Clank also deliver this type of world. You may not be able to reach all the nooks and crannies until you have gone away and learnt new skills.

Other games use their level design to bring their worlds to life. Bioshock’s flooded and rusting hallways, blossoming gardens and…everything about Fort Frolic perfectly paints the dying embers of a Galtian wonderland. Remember Me’s narrative snakes around its levels, with the Bastille Lake and St. Michel Rotunda amplifying the narrative beats that occur in those levels. The hidden tombstones in Modern Warfare 2’s “Contingency” highlight a possible cultural heritage of the area.

Today I wanted to write about a level that encompasses all three types of design, to varying degrees. That level is “St Francis’ Folly” from the Tomb Raider series. “St Francis’ Folly” is a level in the first TR game, meaning that it was remade in Crystal Dynamics’ Tomb Raider Anniversary. So I wanted to talk about the two in tandem, because even though they are the same level, the way they differ gives a different tone to each level.

How “St Francis’ Folly”’s Meaning Changes Through Different Level Design

“St Francis’ Folly” is probably one of the most recognisable and memorable of the original Tomb Raider levels. Jason Botta, creative director for Tomb Raider Anniversary ranked the level second only to the “Lost Valley”, (mainly because the latter had a T-Rex) (2:14).

“St Francis’ Folly” is a really good example of a jump in a difficulty spike. The first four levels of TR1 are spent getting you used to the controls. You’ve done a bit of swimming, a bit of climbing, running, jumping, and most of it is forgiving. If you miss a jump, you just climb back to the spot and try again. “St Francis’ Folly” does not give you that privilege. If you mess up, you will most likely die. It’s really easy to die because the whole point of the level is being REALLY HIGH UP. The structure is so tall in the original game you can’t see the bottom; the draw distance fades to black.

Toby Gard, designer for the original Tomb Raider and Anniversary, stated the goal for the area;

“…It’s quite common that game designers even when they have a 3D vertical space that they can play with, they tend to sort of end up making long, flat things anyway. So that particular area from the original game was just sort of let’s go as vertical as we possibly can…” (2:55).

The level is virtually unchanged from game to game, only with a few trickier challenge rooms for TRA’s more nimble Lara and appropriately named rooms (TR1 had “Neptune” and “Thor” in a tomb in Greece).

The major change to the level is the opening just before the vertical room, so let’s jump back a bit and discuss that section.

Let’s Rewind To The Beginning

The openings of the level are again, very similar. All the designers really had to do was update the climbing and traversal mechanics and it was pretty much set.

But the main difference is GETTING to the vertical room and where in relation it is to the rest of the level. Lets start with TR1.

The start of the level introduces the vertical aspect, in a safe-ish way. You jump from pillar to pillar, working your way around the room. You have some fun with pressure plates and open the big door at the other end of the room. However, this does not lead to the next stage. It is another room with a switch.

The door is in fact above the entrance where you came in. You have to use the previously mentioned pillars to jump up into the rafters, before sliding down into a flooded tunnel and eventually finding the way out, into the vertical room.

Now onto TRA. 

The level starts off pretty much the same. You have a pressure plate that needs to be weighted down, which opens the big door at the far side of the room. You jump between the pillars to get into the rafters to secure the weight for the pressure plate, move it to the ground floor and proceed through the big door.

Then you proceed down a long, long corridor and into the vertical room.

So What?

This is such as small change, but for me it changes the meaning behind the whole set of Greek levels.

All levels in both Tomb Raider and Anniversary are built on top of each other. It is historically accurate; invaders have built on top of previous religious sites and settlements as an attempt to exert their dominance. It’s also thematically relevant, as the “origin” tombs are supposed to be hidden away, kept secret from the world.

But the opening for the first section of the Greek levels in Tomb Raider changes this meaning. In TR1, the vertical room (and by extension, the rest of the subterranean settlements) is hidden back the way you came. It takes a little more thought to figure out where you have to go. And even if you get that far you then have to survive an underwater current and a very hungry crocodile. It feels like a secret entrance to an underground network, somewhere hidden away so that grave robbers can’t just waltz in.

Tomb Raider Anniversary by comparison doesn’t feel like the entrance to a secret tomb, hidden away beneath 4000 years of history. It’s a straight line from the start of the level, the big door beckoning you forward. It feels more like the door to a vault (which is a rather good way of keeping people out). However, a vault-type opening indicates there is something precious behind it, giving grave robbers the incentive to break through rather than giving up because the entrance is hidden away.

Conclusion

It was only recently after playing the two games in comparison that I saw this minute difference. And it only really makes much of an impact if you are interested in the lore or the narrative of the world of Tomb Raider, but that distinction was big enough for me.

In terms of the original and Anniversary, there are more changes that are made for thematic reasons. “Sanctuary Of The Scion”, the final level of the Egyptian section of the game is one that springs to mind. In the original game you come out of the side of the temple, with your prize unceremoniously placed to your left.

In Anniversary, the sanctuary is at the end of a long corridor with a large gate blocking your entrance. You have to use the other two pieces of the Scion (the artifact Lara is searching for) to open up the gate. Thematically this makes much more sense that finding it on a pedestal, as it is the final piece of the artifact that has been locked away for safety.

Another one is the very first level, “Mountain Caves”. The finale of the level is once again, a large door, but to get to it you have to “run the gauntlet” of darts being shot at you. In TR1, you appear on in the corner of the room, an unglamorous (and not death defying) entrance to a hidden civilization.

The point I’m trying to make is the subtle differences between the two games. It’s almost like a translation error; giving us the same work but just off somehow. Don’t get me wrong, I love both version of “St Francis’ Folly”, but their thematic difference makes the original feel more “believable”, even in a game about mutants from Atlantis.

It’s a small change, but it manages to change the tone of the level for me. That’s how important level design is in creating the feel of a world.

That’s not a new observation, but it was very interesting to see it in action.

 

Banner Photo Source: gametripper.co.uk.